International standards
World-class quality assurance

Participate in multiple overseas projects

Participate in multiple overseas projects

British brand
Zero rejection from global consultants

Extensive experience in overseas project submission

Extensive experience in overseas project submission

Perfect combination of creativity and technology
Each cable is made as per demand

Special cable customization service

Special cable customization service
  HomeProuductsAutomotive Cables

FLR31Y11Y Germany Standard Automotive Cable

Application

This TPE insulated low-tension automotive cable is used in motorcycles and other motor vehicles for starting, charging, lighting, signal and instrument panel circuits.

Construction:


Conductor Cu-ETP1 or bare according to DIN EN 13602
Insulation TPE-S Outer
Sheath TPE-U
Standard Compliance ISO 6722 Class C

Technical Parameters:

Operating temperature:–40 °C to +125 °C

Special Properties

Flame retardant
Highly resistant against acids,lyes,petrol and diesel

Conductor Construction Insulation Cable
Nominal cross- section No. and Dia. of Wires Diameter of Conductor max. Electrical resistance at 20°C max. Nominal thickness Diameter of core Sheath wall thickness Overall Diameter Min. Overall Diameter Max. Weight approx.
mm2 No./mm mm mΩ/m mm mm mm mm mm kg/km
2x0.50 28/0.16 1.0 37.1 0.3 1.5 0.7 4.3 4.7 38
2x0.50 28/0.16 1.0 37.1 0.3 1.5 1.0 4.8 5.2 45
2x0.75 42/0.16 1.2 24.7 0.3 1.8 1.2 6.0 6.4 64
2x0.75 96/0.11 1.2 24.7 0.3 1.8 1.2 6.0 6.4 48
3x0.5 19/0.19 1.0 37.1 0.3 1.6 0.8 5.0 5.2 47
3x1.0 19/0.26 1.2 18.5 0.35 2.0 0.8 5.7 6. 7
4x0.5 28/0.16 1.0 37. 0.3 1.5 1.2 6.0 6.4 76
4x0.5 64/0. 1.0 37. 0.3 1.6 1.2 6.0 6.4 5
5x0.5 64/0. 1.0 37. 0.3 1.6 1.0 6.0 6.4 54

*Note: Other configurations, sizes, colors and length not specified herein are available upon request.