HomeProuductsRolling Stock Cables

NF F 63-826 Standard Wall Power & Control Cable
FIREROL FRF-SW-05SU,FRF-SW-1SU,FRF-SW-1.5SU,FRF-SW-3SU

NF F 63-826 Standard Wall Rolling Stock Cables

A. Conductor B. Insulation

Application

These cables are used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor, suitable for use in control, auxiliary and main circuit wiring such as cable harnesses, switchboards and control panels, driver desks etc

Construction

Conductor
Stranded tinned copper wires to IEC 60228 Class 5

Insulation
Special halogen free compound

Electrical & Mechanical Properties

Nominal Voltage 500V, 1000V, 1500V, 3000V
Maximum Conductor Temperature 90°C/105°C
Minimum Permissible Ambient Temperature -25°C~90°C
Bending Radius 4 × Overall Diameter

Standards

NF F 63-826
NF F 16-101
BS 6853
EN45545-2

Fire Performance in general

EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2) Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804 Vertical flame spread of vertically mounted bunched wires or cables
EN 50268-2; IEC 61034-2; NF C 32-073 ; NF C 20-902; NF F 16 101; VDE 0472 Teil 816 Low Smoke Emission
EN 50267-2-1; IEC 60754-1; NF C 32-074;NF C 20-454; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; NF C 32-074;NF C 20-453; VDE 0472 Teil 813 Low Corrosivity (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Low Toxicity
NFF 16101; NFF 63808; BS6853 Smoke index
EN45545-2 Requirement for fire behavior of materials & components R15/R16

FRF-SW-05SU 500V

Nominal Cross Sectional Area Number & Nominal Diameter of Strands Nominal Insulation Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm kg/km
1.0 32/0.20 1.3 3.8 4.5 26
1.5 30/0.25 1.3 4.1 4.8 33
2.5 50/0.25 1.3 4.5 5.2 43
4.0 56/0.30 1.3 5.0 5.8 59
6.0 84/0.30 1.4 5.7 6.5 82
10.0 80/0.40 1.5 6.9 8.1 135
16.0 126/0.40 1.5 8.2 9.2 210

FRF-SW-1SU 1000V


Nominal Cross Sectional Area
Number & Nominal Diameter of Strands Nominal Insulation Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm kg/km
1.5 30/0.25 1.5 4.4 5.2 42
2.5 50/0.25 1.5 4.8. 5.6 55
4.0 56/0.30 1.5 5.4 6.2 72
6.0 84/0.30 1.6 6.1 6.9 96
10.0 80/0.40 1.6 7.0 8.3 154
16.0 126/0.40 1.6 8.3 9.4 218
25.0 196/0.40 1.7 9.8 11.0 316
35.0 276/0.40 1.8 11.2 12.5 440
50.0 396/0.40 1.9 13.0 14.3 580
70.0 360/0.50 2.0 14.7 16.3 830
95.0 475/0.50 2.0 16.6 18.4 1040
120.0 608/0.50 2.1 18.6 20.5 1310

FRF-SW-1.5SU 1500V


Nominal Cross Sectional Area
Number & Nominal Diameter of Strands Nominal Insulation Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm kg/km
1.5 30/0.25 2.3 6.0 6.8 59
2.5 50/0.25 2.3 6.4 7.2 73
4.0 56/0.30 2.3 7.0 7.8 91
6.0 84/0.30 2.3 7.5 8.3 120
10.0 80/0.40 2.3 8.4 9.7 160
16.0 126/0.40 2.3 9.7 10.8 235
25.0 196/0.40 2.3 11.0 12.2 330
35.0 276/0.40 2.4 12.4 13.7 480
50.0 396/0.40 2.5 14.2 15.5 610
70.0 360/0.50 2.7 16.1 17.7 860
95.0 475/0.50 2.7 18.0 19.8 1070
120.0 608/0.50 2.8 20.0 21.9 1340
150.0 756/0.50 2.8 21.8 23.8 1620
185.0 925/0.50 2.9 23.7 25.9 1940
240.0 1221/0.50 3.1 26.6 29.1 2550
300.0 1525/0.50 3.45 29.4 31.9 2950

FRF-SW-3SU 3000V


Nominal Cross Sectional Area
Number & Nominal Diameter of Strands Nominal Insulation Thickness Overall Diameter Weight
Min. Max.
mm² No/mm mm mm mm kg/km
2.5 50/0.25 3.1 8.0 8.8 94
4.0 56/0.30 3.1 8.5 9.5 124
6.0 84/0.30 3.1 8.8 9.9 135
10.0 80/0.40 3.1 10.0 11.3 200
16.0 126/0.40 3.1 11.2 12.4 265
25.0 196/0.40 3.1 12.5 13.8 375
35.0 276/0.40 3.2 13.9 15.3 493
50.0 396/0.40 3.3 15.7 17.2 680
70.0 360/0.50 3.4 17.5 19.1 930
95.0 475/0.50 3.5 19.5 21.4 1066
120.0 608/0.50 3.6 21.6 23.5 1530
150.0 756/0.50 3.6 23.3 25.5 1740
185.0 925/0.50 3.7 25.2 27.6 2100
240.0 1221/0.50 3.9 28.1 31.7 2460
300.0 1525/0.50 4.45 31.4 35.0 3050