HomeProuducts VFD Cables

Armoured VFD Cable with EMC Screening

Application

These cables are used for fixed installation in most areas and on open deck in ships. Design to meet requirements for Variable Frequency Drivers (VFD). Suitable for voltage peaks to 3kV (for cables ≥ 10mm2).

Construction

Conductor Stranded copper conductor conforming to IEC60288 Class 5.
Insulation XLPE insulation conforming to IEC60092-351.
Filler Non-hygroscopic filler tape.
Shield Copper tape with a 100% coverage.
Armor Copper wire braid, coverage > 90%.
Sheath A black, polyolefine plastic, SHF1 conforming to IEC 60092-359.

Technical Information

Rated voltage 1,8/3kV (3,6kV)
Maximum conductor temperature + 90 °C
Minimum recommended installation temperature -15 °C
Lowest operation temperature -40 °C
Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable
IEC 60332-3-22 -test for bunched wires and cables,category A
Halogen-free IEC 60754
Smoke emission IEC 61034
Transfer impedance IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m])

Cable Parameter

Number of conductors & cross-section Cross- section of screen Nominal outer diameter Approx- imate weight Current rating Min. bending radius fixed installation
n x mm2 mm3 mm kg/km A mm
1x16 5,2 13,5 340 96 85
1x25 5,8 15,0 455 127 90
1x35 11,5 16,5 625 157 100
1x50 9,8 18,0 740 196 110
1x70 10,9 20,0 990 242 120
1x95 12,1 22,0 1275 293 135
1x120 13,2 23,5 1535 339 145
1x150 14,3 25,5 1830 389 155
1x185 15,4 27,5 2210 444 165
1x240 17,1 30,0 2830 522 180
1x300 18,6 33,0 3470 601 200
3x16 16,1 26,0 915 67 160
3x25 16,5 29,0 1215 89 175
3x35 18,2 31,5 1570 110 190
3x50 25,1 35,5 2040 137 215
3x70 35,0 39,0 2820 169 235
3x95 35,0 44,0 3645 205 265
3x120 38,1 48,0 4465 237 290
3x150 41,2 51,5 5335 272 310
3x95+3x16 35,0 44,0 4565 205 265
3x120+3x25 38,1 48,0 5190 237 290
3x150+3x25 41,2 51,5 6055 272 310