Home ProuductsIndustrial Cables

EPR/Copper Wire Shield/CPE, Medium-Voltage Power,
Shielded 25KV and 35KV, UL Type MV-105, 133% / 100%
Ins. Levels, 345 Mils

Application

These cables are suitable for use in wet or dry locations when installed in accordance with NEC, use in aerial, conduit, open tray and underground duct installations and use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4 (A) (5). Besides, they are installed in a broad range of commercial, industrial and utility projects such as pulp and paper mills, petrochemical plants, steel mills, textile mills, water and sewage treatment facilities, environmental protection systems, railroads, mines and fossil fuel utility generating stations.

Standard:

National Electrical Code (NEC)
UL 1072
ICEA S-93-639/NEMA WC74
ICEA S-97-682
AEIC CS8
UL 1685 (Sizes 1/0 AWG and larger) UL Flame Exposure Test
IEEE 1202 (70,000 BTU/hr)/CSA FT4
Meets EPA 40 CFR, Part 2671 for leachable lead content per TCLP method
Optional Flame Tests:
ICEA T-29-520 (210,000 BTU/hr)

Cable Construction

Conductor: Annealed bare copper Class B strand.
Extruded Strand Shield (ESS): Extruded thermoset semi-conducting stress-control layer over conductor.
Insulation: Ethylene Propylene Rubber (EPR) insulation colored to contrast with black conducting shield layers.
Composite Insulation Shield and Jacket: Six corrugated copper drain wires embedded in composite layers of semi-conducting thermoset copolymer and semi-conducting black flame-retardant Chlorinated Polyethylene (CPE).

Industrial Cables MV-105

Cable Parameter

CON.
Size
Nominal  CON. Diameter Insulation Diameter Ground Wire Nominal Jacket Thickness Appr.Cable O.D. Appr. Cable Weight Ampacity
Inches mm Min. Max. Inches mm Inches mm LBS/ 1000 FT kg/km In Air GND. Direct Burial
(AWG/
kcmil)
Inches mm Inches mm AWG
1/0 0.34 8.89 1.020 25.91 1.120 28.45 17 0.080 2.03 1.29 32.77 1014 1509 215 215 295
2/0 0.38 9.65 1.060 26.92 1.160 29.46 17 0.080 2.03 1.36 34.54 1163 1731 255 245 335
3/0 0.43 10.92 1.105 28.07 1.205 30.61 17 0.080 2.03 1.41 35.81 1310 1949 290 275 380
4/0 0.48 12.19 1.160 29.46 1.260 32.00 17 0.080 2.03 1.43 36.32 1442 2146 330 315 435
250 0.53 13.46 1.210 30.73 1.315 33.40 16 0.080 2.03 1.51 38.35 1645 2448 365 345 475
350 0.62 15.75 1.310 33.27 1.410 35.81 16 0.080 2.03 1.60 40.64 2024 3012 440 415 575
500 0.74 18.80 1.430 36.32 1.530 38.86 16 0.080 2.03 1.74 44.20 2608 3881 535 500 700
750 0.91 23.11 1.610 40.89 1.710 43.43 16 0.110 2.79 1.95 49.78 3596 5351 655 610 865
1000 1.06 26.92 1.760 44.70 1.865 47.37 16 0.110 2.79 2.11 53.59 4513 6715 755 690 1005